Zone Air® Thin-Air DUAL ZONE 19,000 BTU (9.5K+9.5K) 19 SEER2 230V Concealed Mini-Split Heat Pump System - Up to 950 Sq Ft

Two Hidden Handlers, One Outdoor Unit — 19,000 BTU of Invisible DIY Comfort

The Zone Air 19,000 BTU dual-zone concealed-ducted system conditions two rooms with two hidden air handlers (9,500 BTU each) on a single outdoor condenser — and saves you the $3,000–$5,000 a pro install would cost. Each slim handler hides above the ceiling, in a soffit, or in a closet and feeds short duct runs to discreet vents, so both rooms look fully built-in with only low-profile grilles on display.

Two pre-charged R-454B line sets ship factory-sealed with quick-connect fittings, keeping this true DIY on the refrigerant side — no vacuum pump, no gauges, no EPA Section 608 license. You mount the two hidden handlers and run the short ducts and vents while the refrigerant circuits stay sealed throughout. Rated for up to 950 sq ft across two zones (475 + 475 sq ft), it is ideal for two bedrooms, a bedroom plus office, or any two right-sized rooms you want to keep entirely out of sight.

A dual-zone concealed install is more work than a single unit, but it stays a homeowner project. With a drill, a level, basic hand tools, and clear instructions, you can place both slim handlers and connect their short ducts. The two pre-charged line sets remove the most technical part of the install on both zones.

Why You'll Love It

• Two Independently Controlled Zones — Each hidden handler heats and cools its own room and is controlled separately, so one zone can cool while the other heats — tailored comfort in two spaces from one outdoor condenser.
• Completely Invisible Comfort — Both handlers hide above the ceiling, in soffits, or in closets and feed short ducts to discreet vents. No wall cassettes, no ceiling boxes — just clean, built-in rooms showing only low-profile grilles.
• Up to 19 SEER2 Efficiency — SEER measures cooling efficiency, and a higher rating means lower bills. At up to 19 SEER2 this dual-zone system runs efficiently across both rooms, and mini-splits can cut energy bills by up to 30% versus older equipment.
• Cold Climate Performance — Reliable heating down to -13°F with Energy Star certification. Enhanced vapor injection technology maintains approximately 85% of rated heating capacity at 5°F, keeping both hidden zones warm through deep winter.
• 5-Year Warranty Protection — Zone Air backs this system with comprehensive coverage — 5-year parts and 7-year compressor warranty — plus a 45-day satisfaction guarantee for total security and peace of mind.

What Makes It Different

Two-zone concealed-ducted installs are among the priciest jobs contractors quote — two hidden handlers, two duct runs, and two refrigerant circuits to charge and vacuum. Zone Air ships both line sets pre-charged and factory-sealed, so the invisible, built-in result across two rooms is achievable at home.

• Pre-Charged Line Set Technology — Both line sets arrive factory-sealed with R-454B refrigerant. Hand-tighten the quick-connect fittings on each zone, torque to spec, and the refrigerant side is done. No vacuum pump, no gauges, no HVAC license — pre-charged line sets eliminate the need for HVAC licensing entirely.
• Two Hidden Zones, Truly DIY — Two concealed handlers on one condenser give you the custom, ductless-free look of a built-in multi-room system while keeping the work homeowner-friendly: mount each handler, connect short ducts to the vents, and snap together each pre-charged line with step-by-step instructions and video support.
• Cold Climate Optimization — Unlike standard mini splits that lose capacity below freezing, this is a purpose-built cold climate heat pump using enhanced vapor injection to hold heating output down to -13°F across both zones — not an air conditioner with a reversing valve bolted on.

How It Works

1. Mount and Duct Both Zones — Secure each slim concealed handler above the ceiling, in a soffit, or in a closet and connect short duct runs to the discreet vents in each room. Route both pre-charged line sets to the single outdoor condenser and join each with its quick-connect fittings. Testing every connection with soapy water is mandatory to check for leaks before activation, and proper torque and sealing are essential for leak prevention.
2. Power and Configure — Wire the condenser to a dedicated 208–230V circuit — a licensed electrician is recommended for the electrical disconnect box to ensure code compliance and safety. Once powered, configure WiFi and set up each zone in the smartphone app in minutes.
3. Invisible Two-Zone Comfort — Both hidden handlers quietly condition their rooms while the equipment stays out of sight. Control each zone independently for tailored comfort, with a built-in look and nothing on display in either space.

Who It's For

Ideal for:

• Homeowners conditioning two right-sized rooms who want comfort they can feel but never see — no wall or ceiling units on display
• Budget-conscious owners who want a high-end, built-in two-zone concealed system without paying thousands for professional installation
• Two bedrooms, a bedroom plus office, or any two spaces up to 950 sq ft total that each need independent, discreet control
• Cold climate residents who want reliable winter heat in two rooms from one hidden, ductless-free-looking system

If you want invisible comfort in two rooms, independent zone control, and the satisfaction of installing your own system, this 19,000 BTU dual-zone setup fits your needs. Energy-efficient mini-splits can qualify for rebates and tax credits — including up to $2,000 under the federal Section 25C tax credit for qualifying heat pumps — for savings across years of use.