Zone Air® Thin-Air 3 ZONE 28,500 BTU (9.5K+9.5K+9.5K) 22 SEER2 230V Concealed Mini-Split Heat Pump System - Up to 1,425 Sq Ft

Three Hidden 9.5K Air Handlers, One Outdoor Unit — Completely Concealed 3 Zone Comfort

This 3 zone concealed ducted mini split hides all three indoor units above the ceiling or inside soffits — the only visible hardware is a discreet supply grille in each zone. Three 9,500 BTU Thin-Air ducted units condition up to 1,425 square feet across three independently controlled zones, and because each unit can feed short duct runs to two or three registers, a single zone can cover a bedroom plus its closet.

Three pre-charged R454B linesets ship in the box, so the refrigerant circuit never opens — no vacuum pump, no gauges, and no EPA Section 608 license. The 27,000 BTU multi-zone condenser is rated 22 SEER2 with heating down to -13°F, and one outdoor unit serves all three hidden air handlers from a single circuit and a single set of penetrations.

Why You'll Love It

• Completely Invisible — All three air handlers hide above the ceiling or in soffits — only a discreet grille shows in each room, for climate control that looks fully built-in.
• Multi-Room Per Zone — Each 9,500 BTU ducted unit can feed short runs to two or three registers, so one zone can quietly cover a bedroom plus a bathroom and closet.
• Right-Sized 9.5K Zones — Each unit covers up to 475 sq ft — ideal for smaller suites and finished rooms where hidden equipment and a modest load make sense.
• True DIY Refrigerant Side — Three pre-charged, quick-connect linesets mean no vacuum pump, no gauges, and no HVAC license — you handle the mounting and short duct runs, the refrigerant work is done.
• 5-Year Warranty Protection — Zone Air backs all three concealed units and the condenser with 5-year parts and 7-year compressor coverage, plus 30-day returns on uninstalled systems.

What Makes It Different

Concealed ducted systems are almost always sold as full pro installs because they assume a technician will charge three line runs and design the ducting. The Thin-Air keeps the refrigerant side DIY with pre-charged, quick-connect linesets while you handle the mounting and short duct runs.

• Three Pre-Charged Linesets — Every line run arrives factory-sealed with R454B inside. Hand-connect the quick-connect fittings on each unit, torque to spec, and the circuit is ready — no vacuum pump, no gauges, no HVAC license.
• Closely Matched Capacity — Three 9,500 BTU units connect 28,500 BTU/h of indoor capacity to a 27,000 BTU/h rated condenser — a standard multi-zone ratio that works because three zones rarely peak together. Both numbers are in the spec table below.
• One Circuit, Not Three — A single 230V circuit on a 30A double-pole breaker powers all three hidden air handlers, instead of three separate circuits for three single-zone units.

How It Works

1. Mount and Duct — Secure each concealed air handler above its room — in the ceiling cavity, a soffit, or a closet — and connect short supply runs to the discreet grilles. Set the outdoor unit on a pad or bracket and route the three pre-charged linesets.
2. Connect and Check — Hand-thread the quick-connect couplings on each of the three circuits, torque to spec, and test every joint with soapy water before startup.
3. Power and Pair — Wire the condenser to a dedicated 208–230V circuit (a licensed electrician is recommended for the disconnect box), then set up each zone on its wired controller or the WiFi app.

Who It's For

This 3 zone concealed system is for:

• Luxury homes, historic renovations, and finished spaces where all equipment must stay out of sight
• DIYers comfortable mounting hidden handlers and running short duct runs, who want to skip the refrigerant work
• Three smaller suites or rooms around 350–475 sq ft each, some feeding more than one register
• Cold climate homeowners who need dependable heat in every zone down to -13°F

Need more capacity? The 3 zone 33K (11K×3) concealed system steps each zone up to 550 sq ft.